KJS180 series belt tension Slitting line
  • KJS180 series belt tension Slitting line
  • KJS180 series belt tension Slitting line

KJS180 series belt tension Slitting line

Model No.: KJS180-2x1300
Price Terms:
Payment Terms: T/T,T/C
Comments: NC precision slitting production line is for material 3mm thick,max.1600mm width of coil, with speed 180m/min,cutting strips 30 pieces

Get a quote


I.Introduction of KJS180 series belt tension Slitting line
       KJS180 series NC precision slitting production line is for material 3mm thick,max.1600mm width of coil, with speed 180m/min,cutting strips 30 pieces . This line is the best choice for coil procssing center user .The  machine  consists of coil car ,uncoiler ,straightener ,loop Ⅰ,slitting machine,scrap winder, loop Ⅱ,belt bridlle  ,recoiler ,asisting support ,exit coil car ,hydraulic system ,electrical system and so on. 

The whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi, Yaskawa, Siemens, Baumueller, Delta, and Schneider. The information of order amount, cutting strips and speed can be input to the PLC systems. KJS180 series use belt briddle ,it is higher cost performance for customer with precision surface requirement .

II.Technical data for KJS180


         modelthickness
(mm)
width(mm)slit number PCSAccuracy(mm)Speed
(m/min)
weight(t)
KJS180-1*6500.2-1150-65030-8±0.050-1803、5
KJS180-1*8500.2-1300-85030-8±0.050-1805、10
KJS180-1*10500.2-1300-105030-8±0.050-1805、10
KJS180-1*13000.2-1400-130030-8±0.050-18010、15
KJS180-2*6500.3-2150-65030-8±0.050-1803、5
KJS180-2*8500.3-2300-85030-8±0.050-1805、10
KJS180-2*10500.3-2300-105030-8±0.050-1805、10
KJS180-2*13000.3-2400-130030-8±0.050-18010、15
KJS180-2*16000.3-2400-160030-8±0.050-18015、20
KJS180-2*20000.3-2500-200030-8±0.050-18015、20
KJS180-3*13000.4-3400-130030-6±0.050-18010、15
KJS180-3*16000.4-3400-160030-6±0.050-18015、20


III.Slitting machine main components :
1.Coil car 
2.Decoiler   
3.Peeler entry table
4.Straightener.
5.Shearing machine   
6.Loop table                                                 
7.Coil guide and pinch roll                    
8.Slitting machine
9.Scrap winder (both sides)
10.Loop table
11.Separator and tension table
12.Deflector roll and exit threading table
13.Recoiler
14.Over arm separator in the recoiler.
15.Exit coil car for recoiler
16.Hydraulic system
17.Pneumatic system
18.Electrical control system


V.About us     
Kingjime machine Limited is a TaiWan of Chinese technological enterprise manufacturer with Japanese technology to make steel coil cut to length line ,slitting line ,High Frequency pipe mill machine,nc servo feeder machine .We owned National high and new technology enterprise with 40 patents and intellectual property rights over the last for years.welcome to kingjimemachine as they!
  We will be in the equipment arrival, immediately arrange overseas after-sales service engineer in 15 working days or so to complete equipment installation and commissioning work,we have established steady cooperation with customers in over 58 countries.If you keep in touch with us, we can provide you need the machine to work in the field of video.