I. General Introduction of KJH25 thin steel low speed cut to length line
KJH25 series is an economic cut to length line machine developed by KINGJIME MACHINE for some customers to cut max 4mm thick from 1250mm to 2000mm width of coil.
The machine can do uncoiling, leveling, measuring, cross-cutting to length and stacking work. It is a compact Coil Line principle revolves around combining the functions of coil line, decoiling, flattening and feeding of the material. This is typically achieved utilizing several configurations, a leveler feeder unit along with a motorized uncoiler; a leveler feeder unit along with a powered coil car and pull through leveler feeder and motorized uncoiler.
The line has no pit loop and can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.
II.Technical Data for KJH25 Thin series
Cut to length line is controlled by PLC system and it has the rotary encoder to control the length measurement. The information of length, shearing numbers and speed can be input to the PLC systems. When the need shearing length is reached, the machine can cut automatically. The line speed can be adjusted, It has a measuring with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.
1. Coil car
2. Double Cone Decoiler
3. Snubber Arm.
4. entry support peeler table
6. roller table
7. Side Guide Roller
8. The leveler
9. end plate run out pinch roll
10. Hydraulic Shearing Machine
11. stacking table
12. Hydraulic Systems
13. Pneumatic Systems
14. Electrical System PLC Control IV.Layout