Our Product: Stamping Mold Modern Facilities Engineering and Development Quality Assurance System Molds Products 

• 
• 
• 
• 
• 

1.( TNCF3-XXX) NC Servo 3 in 1 Straightener,feeder and uncoiler

I.Feeding feature by PLC program from MITSUBISHI 1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on. 2.High precision feeding: to meet the coming of hi-tech industry, contr...

2010-09-08

2.CNC 4 rolls

This four rolls bending machine used to coil plate into different sharps such as cylindrical form, conic form and arc, it adopted Japan hydraulic technical. Top roll is main drive rolls, it can does vertical and level motion, up and down, parallel translation is display. This machine include pre-bending function. Down rolls were driven by two cyl...

2010-09-08

3.Automatic Heavy Duty Cut To Length Machine Line

Cutting line Description: The line is fit for hot-rolled steel sheet, stainless steel sheet, plate begins with a variety of straighten-shear length specifications sheet, and fringe trimming function. From the standard configuration: Feeding car, uncoiler, Reply feeder, feeding of pre-leveling, the transition table, spacing device (trimming mach...

2010-09-08

4.Cut to length line

            I. General Induction. Cut to Length Lines can do uncoiling, straightening, gauging, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It ca...

2010-09-08

5.Decoiler with coil car

 Decoiler and Cars:decoilers have capacities ranging from 3 tons to 20tons. and widths ranging from 200mm to 1600mm.  The design of our reels incorporates a unique"bearing tube"with dual cup and cone Timken bearings to the mandrel and a heavy duty cabinet base. Both motorized and pull-off type reels are available, depending on the application. Sin...

2010-09-08

6.Heavy Gauge Low Speed Cut To Length Line

  specification   I. General Induction.           Cut To Length Lines can do uncoiling, straightening, measuring, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate fee...

2010-09-08

7.Low speed cut to length line

        specification       I. General Induction. Cut to length line is used in decoiling, straightening and shearing different specification coils into flat steel plate with different width and length, and then stacking the flat steel plate. this production line which is high automatization and simple operation can process all kinds of ...

2010-09-08

8.Heavy Gauge High Speed Cut To Length Line

  specification        Cut To Length Lines can do uncoiling, straightening, measuring, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widel...

2010-09-08

9.High speed cut to length line

         specification:   I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to lengt and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate fe...

2010-09-08

10.GL material rack and flattening machine (2 in 1)

Features: idler wheel straightening and feeder is placed on one machine, which can reduce errors and get high precision. Convenient installation and space saving. specification of new material straightener + material rack (special specifications can be ordered)

2010-09-08

11.Slitting line for thick sheet

2010-09-08

12.( TNCF4-XXX)NC Servo 3 in 1 Straightener,feeder and uncoiler

   I.Feeding feature by PLC program from MITSUBISHI 1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on. 2.High precision feeding: to meet the coming of hi-tech industr...

2010-09-08

13.( TNCF2-XXX)NC Servo 3 in 1 Straightener,feeder and uncoiler

I.Feeding feature by PLC program from MITSUBISHI       1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on. 2.High precision feeding: to meet the coming of hi-tech industry, ...

2010-09-08

14.( TNCF1-XXX)NC Servo 3 in 1 Straightener,feeder and uncoiler

I. Feeding feature by PLC program from MITSUBISHI 1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on. 2.High precision feeding: to meet the coming of hi-tech industry, contr...

2010-09-08

15.2 in 1 Straightener and uncoiler( UL-X00)

Features: 1. Match with TL mode straightener, good effect, save feeding time, improve production capacity, reduce cost and strengthen competition ability. 2. Control box equipped with Japanese electronic components, minimum breakdown and long operating life. 3. .Roller is made of ...

2010-09-08

16.Uncoiler & Leveler

Model No: Go-300 Features. 1. Integrated with uncoiler and straightener ,save volume, suitable for board processing. Automatically adjust feeding time according to output speed. 2. All rolls are made of bearing steel, have all been quenched, hard-chrome plated and g...

2010-09-08

17.Straightener machine

Features and structure: Use Japan electromagnetic contact and electric parts, long service life Suitable for 1.0-6.0mm thickness materials, designed for saving space and easy operation Suitable for various production, fast in material changing, save time and reduce production...

2010-09-08

18.2 in 1 Straightener and uncoiler (TLS-XXX)

Features 1.The unique openable bias rolls design. 2.the whole upper rollers can be opened 3.easy loading, feeding, cleaning and operation 4.The upper work rollers adop 4 point fine micro adjusters with reading 0.01 mm advance reference indicators, high quality and precision. 5.All rolls are made of bearing steel (SUJ2), have all been quenched,...

2010-09-08

19.2 in 1 Straightener and uncoiler (BAL-X00)

Feature 1.Electric Eye Loop Control System and pneumatic control system, high performance. 2.Feed and straightener roll with a hard chrome plated. 3.Outgoing catenary to assist and support the material 4.Hold down arm device 7.Uncoiler with inverter control 8.Reference indicator adjuster 9.2 in 1 uncoiler and straightener saves space and ...

2010-09-08

20.2 in 1 straightener and uncoiler (GO-XXX)

Model No: Go-300 Features. 1. Integrated with uncoiler and straightener ,save volume, suitable for board processing. Automatically adjust feeding time according to output speed. 2. All rolls are made of bearing steel, have all been quenched, hard-chrome plated and grinded with mim HRC60.. 3. Use Japanese electromagnetic contact and electric pa...

2010-09-08