Home > Slitting Line >

high speed metal slitting machine

high speed metal slitting machine

  • Categories:
  • Slitting Line
  • Brand:
  • kingjime
  • Model:
  • KJS120-2-1300
  • Steel Thick:
  • 0.15-16 mm
  • Steel Width:
  • 400-2500mm
  • Product Name:
  • high speed metal slitting machine
  • Unit Price:
  • US$ 200000
  • FOB port:
  • shenzhen
  • Terms of Payment:
  • L/C,T/T
  • Update Time:
  • 01-20-2018
Detail Information

I.  Introduction of high speed metal slitting machine

   slitting line is named with KJS code with workstations for uncoiling, slitting cut and rolling. It consists of feeding trolley, assisting support, decoiler, pincher, straigntener, slitting cutter, edging machine, tensional machine, recoiler machine, and downloading equipment, hydraulic system and so on. The whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi, Yaskawa, Siemens, Baumueller, Delta, and Schneider. This line can help to improve efficiency, lower cost and ensure quality. KJS has won wide market with its high performance and low price. The thickness of material can be from 0.15MM to 16MM, width from 600MM to 2500MM, quantity from 6 to 30 pieces, highest precision ±0.05MM and speed 200M/min. This line is applicable for processing of copper, aluminum, cold-reduced material, hot rolled material, silicon steel, and stainless steel and so on.

II.Machine parts in the working line
1.        coil car 
2.        decoiler   
3.        peeler entry table
4.        Straightener.
5.        Shearing machine   
6.        loop table                                                 
7.        coil guide and pinch roll                    
8.        Slitting machine
9.        scrap winder (both sides)
10.    Loop table
11.    separator and tension table
12.    Deflector roll and exit threading table
13.    Recoiler
14.    Over arm separator in the recoiler.
15.    Exit coil car for recoiler
16.    Hydraulic system
17.    pneumatic system
18.    electrical control system

III.Technical data

main materialall kinds of metal coil
coil weight(ton)3,5,10,15,20,25,30,40
coil width(mm)650,850,1000,1300,1600,2000,2500
coil thickness(mm)0.25-2,0.4-3,0.5-4,1-6,2-8,3-10,4-16
coil I.D(mm): 508mm (470-610)
coil O.D (mm): 1200-1800
line speed(m/min)0-40,0-60,10-120,20-180
number of slitting5~30
Cutting accuracy(mm/m)0.05
voltage/ HZ380/440V-50HZ   660V-60HZ
capacity load 2500-5500 tons/ month

IV.About us    
Kingjime machine Limited is a TaiWan of Chinese technological enterprise manufacturer with Japanese technology to make steel coil cut to length line ,slitting line ,High Frequency pipe mill machine,nc servo feeder machine .We owned National high and new technology enterprise with 40 patents and intellectual property rights over the last for years.welcome to kingjimemachine as they!
we have established steady cooperation with customers in over 58 countries.

We will be in the equipment arrival, immediately arrange overseas after-sales service engineer in 15 working days or so to complete equipment installation and commissioning work.If make accurate quotation  Need to provide for detailed requirements to me. Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (kg)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on :

high speed metal slitting machine
  • high speed metal slitting machine
  • high speed metal slitting machine
  • high speed metal slitting machine
  • high speed metal slitting machine
Please send your message to us
* We will reply your inquiry to this Email as soon as we see it(All fields are required.)
  • /

Agree to use terms of service