Features:
1) High speed SPM 600
2) Easily adjust for different thinckness and width
3) Practical and economical with simple mechanism
4) Easy maintained with less trouble

Feed accuracy:
Depends on feed length of stock and stroke of press, the general accuracy
is within +/-0.05mm, and can be better up to +/-0.01mm by pilot
pin with automatic stop system.

Single type
1) For cutting stock at certain length or coiling back the finished products
2) Double type: for there is any stuff left after stamping and for short or thin
    stock

Mechanical features:
1) One way clutch:
    a) Made of tungsten carbide steel on the contacting surface to keep
        rigidity, precision, and durability
    b) The gear has high precision transmission after HRC 60 degrees heat
        treatment and precisely ground
2) Roller:
    a) High feed accuracy at exact positioning with hollow roller of less eight,
        and lower inertia
    b) Hard chrome plated heat treated to HRC60 degree and ground for the
        best rigidity and durability
3) The anti-reversing device:
    a) The structure is same the one way clutch, It can precisely control the
        lower roller which will not reverse even for long time used as it is high
        in stability and precision
    b) The brake will not out of control by the splashed waste oil when it is
        punching such cause the lower roller to reverse, and transfer distance
        imprecision
    c) It will not cause high heat
    d) Super hard alloy and rolling post have been used. they are not easy to
        wear out
    e) The acting form of the rolling post is by circular movement, not like the
        four guided posts in straight line moving, so it will not stuck
    f) As less friction it will accrued, so the torsion it need will correspondingly
       reduced. The transfer structure will not easy wear out
    g) Speed can be reach to 30M/ min if the reversing device is fitted. In
        general, it is 20M/min. Efficiency has been increase about 50%
    h) Customers are welcomed to place orders for special specifications