I. Feeding feature by PLC program from MITSUBISHI

1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.

2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.

4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.

5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 40m/min

II. Straightening feature.

Features

1.3 in 1 uncoiler and straightener saves space and increase productivity.

2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.

3.Feed and straightener roll with a hard chrome plated.

4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.

5.Electric loop control system.

6.Power hold down arm device

7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.

8.Feeding line easily adjusted by advance worm gear screw Jacks device

9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,

10.Coil side guide

11.Outgoing catenary to assist and support the material

12.A Clusster gear set maximizes transmission of horse power.

13.Transforme

 

 specification 

Item   Model	TNCF5-400		TNCF5-500	TNCF5-600	TNCF5-700			TNCF5-800
Coil width(mm)	100 -400		100-500	100-600	100-700			100-800
Coil thickness(mm)	0.6-6.0mm
Uncoiler expansion	Hydraulic
Load weight(kg)	3000					5000
Coil I.Dia(mm)	508
Coil O.Dia(mm)	1200
Main motor (kw)	AC Servo 5.0					AC Servo 7.0
Uncoil motor	A C Servo 1.5						AC Servo2.2
Straightener Rolls(set)	upper4/lower3
Feed Rolls(set)		upper1/ lower1
Inverse curve Roll(set)		lower 1
Pinch Roll		upper 1/ lower1
Feed Level (mm)	1100-1200mm
Uncoiler sensor	Electric eye Loop
speed( m/min)	0-16
Air supply (kg/cm2)	5

straightening performance

 

mode	material wide(mm)
	thickness range(mm)	400mm	500mm	600mm	700mm	800mm	1000mm
material thickness	1.0-2.5	400mm	500mm	600mm	700mm	800mm	1000mm
	3.2				600mm	600mm	600mm
	4			500mm	500mm	500mm	500mm
	4.5		320mm	400mm	400mm	400mm	400mm
	5	350mm	280mm	350mm	350mm	350mm	350mm
	6	300mm	200mm	300mm	300mm	300mm	300mm