Feature

1.Electric Eye Loop Control System and pneumatic control system, high performance.

2.Feed and straightener roll with a hard chrome plated.

3.Outgoing catenary to assist and support the material

4.Hold down arm device

7.Uncoiler with inverter control

8.Reference indicator adjuster

9.2 in 1 uncoiler and straightener saves space and increase productivity.

10.Straightener opener design, it is good for cleaning rolls and maintenance.

11.Outgoing catenary to assist and support the material

12.A Cluster gear set maximizes transmission of horse power.

13.Uncoiler with inverter control

Specification

Model:	BAL-300	BAL-400	BAL-500		BAL-600	BAL-700		BAL-800
Coil Width(mm)	300	400	500		600	700		800
Coil thickness(mm)	0.3-2.0	0.3-2.0	0.3-2.0		0.5-2.0	0.5-2.0		0.5-2.0
Load weight  (kg)	2000	2000	2000		3000	3000		3000
Coil.I. Dia(mm)	480-520
Coil. O. Dia (mm)	1200			1500
Speed (m/min)	15
Straighten Rolls (mm)	¦Õ48*11			¦Õ60*11
	Up 5      down 6			Up 5      down 6
Guide Rolls	¦Õ78			¦Õ90
Motor(HP)	3HP 380V		5HP 380V				7.5HP 380V
Expansion Method	Hydraulic
Uncoil Method	Master
Uncoil Sensor	Electric Eye Loop
Uncoil Power	2HP
Coil Car	Option

I. Feeding feature by PLC program from MITSUBISHI

1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.

2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.

4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.

5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 40m/min

II. Straightening feature.

Features

1.3 in 1 uncoiler and straightener saves space and increase productivity.

2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.

3.Feed and straightener roll with a hard chrome plated.

4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.

5.Electric loop control system.

6.Power hold down arm device

7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.

8.Feeding line easily adjusted by advance worm gear screw Jacks device

9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,

10.Coil side guide

11.Outgoing catenary to assist and support the material

12.A Clusster gear set maximizes transmission of horse power.

13.Transforme

 

 specification 

Item   Model	TNCF5-400		TNCF5-500	TNCF5-600	TNCF5-700			TNCF5-800
Coil width(mm)	100 -400		100-500	100-600	100-700			100-800
Coil thickness(mm)	0.6-6.0mm
Uncoiler expansion	Hydraulic
Load weight(kg)	3000					5000
Coil I.Dia(mm)	508
Coil O.Dia(mm)	1200
Main motor (kw)	AC Servo 5.0					AC Servo 7.0
Uncoil motor	A C Servo 1.5						AC Servo2.2
Straightener Rolls(set)	upper4/lower3
Feed Rolls(set)		upper1/ lower1
Inverse curve Roll(set)		lower 1
Pinch Roll		upper 1/ lower1
Feed Level (mm)	1100-1200mm
Uncoiler sensor	Electric eye Loop
speed( m/min)	0-16
Air supply (kg/cm2)	5

straightening performance

 

mode	material wide(mm)
	thickness range(mm)	400mm	500mm	600mm	700mm	800mm	1000mm
material thickness	1.0-2.5	400mm	500mm	600mm	700mm	800mm	1000mm
	3.2				600mm	600mm	600mm
	4			500mm	500mm	500mm	500mm
	4.5		320mm	400mm	400mm	400mm	400mm
	5	350mm	280mm	350mm	350mm	350mm	350mm
	6	300mm	200mm	300mm	300mm	300mm	300mm

 

I. Feeding feature by PLC program from MITSUBISHI

1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.

2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.

4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.

5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 100m/min

II. Straightening feature.

Features

1.3 in 1 uncoiler and straightener saves space and increase productivity.

2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.

3.Feed and straightener roll with a hard chrome plated.

4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.

5.Electric loop control system.

6.Power hold down arm device

7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.

8.Feeding line easily adjusted by advance worm gear screw Jacks device

9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,

10.Coil side guide

11.Outgoing catenary to assist and support the material

12.A Clusster gear set maximizes transmission of horse power.

13.Transforme

          specification

Item  Model	TNCF6-400	TNCF6-500	TNCF6-600	TNCF6-700	TNCF6-800	TNCF6-1000
Coil Width(mm)	70-400	70-500	70-600	70-700	70-800	70-1000
Coil Thickness(mm)	0.8-8.0
Uncoiler Expansion	hydraulic
Load Weight(kg)	3000-5000
Coil I.O.(mm)	508
Coil. O. D (mm)	1200
Main Motor (kw)	AC servo/5.0 or 7.0
Uncoiler Motor	1.5kw			2.2kw
Straightener Roll (Qty)	upper 3/lower4
Feed Roll	Upper 1/ lower 1
Feed pitch Accuracy(mm)	+/-0.15
Loop Control	photoelectric sensor
Speed Range ( m/min)	0-16
Air Supply (kg/cm2)	5

straoghtening thickness

model	material width(mm)
Material thickness	material thickness range(mm)	400mm	500mm	600mm	700mm	800mm	1000mm
	0.8-1.4	400mm	500mm	600mm	700mm	800mm	1000mm
	2.5						900mm
	3.2						800mm
	4					700mm	700mm
	4.5				600mm	600mm	600mm
	5			500mm	500mm	500mm	500mm
	6		400mm	400mm	400mm	400mm	400mm
	7	300mm	300mm	300mm	300mm	300mm	300mm
	7.5	200mm	200mm	200mm	200mm	200mm	200mm
	8	170mm	170mm	170mm	170mm	170mm	170mm

Specification  (HS)

Feeding feature by PLC program from Mitsubishi:
1) NC Servo feeding. Operating with computerized numerical control by
   PLC program from Mitsubishi made in Japan. The electrical parts from
    YASKAWA made in Japan including Servo motor, driver, encoder, interface
    screen and so on
2) High precision feeding: to meet the coming of hi-tech industry, controlled
    by computer closed circuit feedback system to keep precision degree
    within ¡À0.03mm
3) Feeding function: input 20 sets of different feeding length, each
    group provides 999 times for punching or cutting to satisfy processing of
    special products
3) High efficiency release device, match with adjustment of signal from
    the cutter or press machine through cable wire
4) Setting of feeding length: directly input feeding length on the control
    plate, and then it can reach needed distance, feed length max. 9999.99mm,
    speed max. 100m/min

press features:
The body of JH21 series press is welded with steel plate,so it is with good rigidity
and stable precision.The crankshaft is placed lengthways,so the structure is
compact and the contour beautiful. Using the combined pneumatic friction clutch
and brake,so the engagement is smooth,the action agile,and the noise low.Gear pair
adopts the flooding system lubrication.The slide block is six-face rectangle
with longer guide track whose face is bronze panel.Meanwhile an import hydraulic
overload protector is installed in the slideblock whose air pump and high pressure
ring seal are imported from other country.Its action is agile and reliable.The
die set is adjusted by motor over JH21-63 press.There set lifting balance cylinder
at the slideblock over model JH2I-4O press,whose ring seal is imported from
other country.The air pipeline is controlled by safety duplex valve. Its electric
circuit is controled by import PLC.The press can be equipped with air cushion,
automatic feed shaft and photoelectric protector,and can be equipped with various
automatic equipment which conform to the safety standard of press.

specificatiom

mode	CLS-150	CLS-200	CLS-300	CLS-400	CLS-500	CLS-600	CLS-700	CLS-800
material width	150	200	300	400	500	600	700	800
material thickness	0.5-3	0.5-3	0.5-3	0.5-3	0.5-3	0.5-3	0.5-3	0.5-3
Decelerator	1/30	1/30	1/30	1/30	1/30	1/30	1/30	1/30
motor	1	1	1	2	2	3	3	5
feeding Rollers	60Ø*2 80Ø*2	60Ø*2 80Ø*2	60Ø*2 80Ø*2	70Ø*2 98Ø*2	70Ø*2 98Ø*2	70Ø*2 98Ø*2	70Ø*2 98Ø*2	70Ø*2 98Ø*2
straightening Rollers	50Ø*7	50Ø*7	50Ø*7	60Ø*7	60Ø*7	60Ø*7	60Ø*7	60Ø*7

Features

1.The unique openable bias rolls design.

2.the whole upper rollers can be opened

3.easy loading, feeding, cleaning and operation

4.The upper work rollers adop 4 point fine micro adjusters with reading 0.01 mm advance reference indicators, high quality and precision.

5.All rolls are made of bearing steel (SUJ2), have all been quenched, hard chrome plated and ground with min. HRC 60 degree.

7.Outgoing cantenary to assist and support the material.

8. Japanese bearings-high precision and durable. Add gear lubrication system. Quality guarantee.

specification

Item           Model	TLF-200	TLF-300	TLF-400	TLF-500	TLF-600
Coil Width(mm)	200	300	400	500	600
Coil Thickness(mm)	0.1-1.5			0.1-1.3	0.1-1.2
Invertor	provide
Straightener Motor (kw)	1kw	1kw	2kw	3kw	3kw
Straightener Roll (Qty)	upper8 /lower9 All driven function
Back up rolls	No		Provide
pinch roll(Qty)	upper1/lower1 All dreiven function
Loop Control	touch sensor
Speed Range ( m/min)	22m/min
thickness adjustment	4 points fine micro Adjustment

Straightening Performance

thickness(mm)	0.1	0.35	0.6	0.8	1	1.2	1.5
TLF-200	200mm				150mm	100mm	80mm
TLF-300	300mm			200mm	150mm	100mm	80mm
TLF-400	400mm				300mm	250mm	200mm
TLF-500	500mm				300mm	250mm	200mm
TLF-600	600mm				300mm	250mm	200mm

It is powerful new equipment, used in high-speed pressing; it can improve the quality and quantity of press workpieces. GJ two-section type straightening, the head is <--> during roll straightening , there is no need straightening in the midway. In order to get good performance, the rolling material has to be straightened

specification of JM3 series

(JM3 whole-section type straightener suitable for straightening of continoual rolling and slice material, its features are similar with that of one-section type)