I.Feeding feature by PLC program from MITSUBISHI                                             1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.
4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 100m/min
II. Straightening feature.
Features
1.3 in 1 uncoiler and straightener saves space and increase productivity.
2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.
3.Feed and straightener roll with a hard chrome plated.
4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.
5.Electric loop control system.
6. Hold down arm device
7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.
8.Feeding line easily adjusted by advance worm gear screw Jacks device.9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,
10.Coil side guide.
11.Outgoing catenary to assist and support the material12.A Clusster gear set maximizes transmission of horse power.
13.Transformer

specification

Item    Model	TNCF2-300			TNCF2-400	TNCF2-500	TNCF2-600
Coil Width(mm)	75-300			75-400	75-500	75-600
Coil Thickness(mm)	0.3-2.3
Uncoiler Expansion	hydraulic
Load Weight(kg)	3000-5000
Coil I.O.(mm)	508
Coil. O. D (mm)	1200
Servo Motor (kw)	AC3.5
Uncoiler Motor	1.5KW				2.2KW
Straightener Roll (Qty)	upper 6/lower5
Feed Roll	Upper 1/ lower 1
Feed pitch Accuracy(mm)	+/-0.15
Loop Control	photoelectric sensor
Speed Range ( m/min)	0-16
Air Supply (kg/cm2)	5

   Straightener performance

mode	material width(mm)
type	material thickness range(mm)	300mm	400mm	500mm	600mm
Material thickness	0.3	300mm	400mm	500mm	600mm
	0.8
	1.2				400mm
	1.6			390mm	300mm
	2		280mm	250mm	240mm
	2.3	220mm	210mm	190mm	180mm

I. Feeding feature by PLC program from MITSUBISHI

1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.

2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.

4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.

5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 40m/min

II. Straightening feature.

Features

1.3 in 1 uncoiler and straightener saves space and increase productivity.

2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.

3.Feed and straightener roll with a hard chrome plated.

4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.

5.Electric loop control system.

6. Hold down arm device

7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.

8.Feeding line easily adjusted by advance worm gear screw Jacks device

9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,

10.Coil side guide

11.Outgoing catenary to assist and support the material

12.A Clusster gear set maximizes transmission of horse power.

13.Transformer

 

Specification

Item  Model	TNCF1-300			TNCF1-400	TNCF1-500	TNCF1-600
Coil Width(mm)	55-300			55-400	55-500	55-600
Coil Thickness(mm)	0.15-1.5
Uncoiler Expansion	Hydraulic
Load Weight(kg)	2000-3000
Coil I.O.(mm)	508
Coil. O. D (mm)	1200
Servo Motor (kw)	AC 0.75		AC 1.5			AC 2.2
Uncoiler Motor	1.5kw					2.2kw
Straightener Roll (Qty)	Upper8/lower9				Upper10/lower9
Feed Roll	Upper 1/ lower 1
Feed pitch Accuracy(mm)	+/-0.15
Loop Control	Electric eye sensor
Speed Range ( m/min)	0-16
Air Supply (kg/cm2)	5